Skip to main content

numerics - How can I solve Tan[t] - t == F[x] for t as a function of x?


How can I solve the equation Tan[t] - t = Ax, where A is a constant for t[x]?


I know that it's impossible to get a close-form solution, but how can I get a numerical approximation with Mathematica?



Answer



A supplement to above two wonderful answers:


Notice that any two of the branches of curve $C$ defined by $f(t)=\tan(t)-t$ are identical with only a translation of $\boldsymbol{\mathrm{v}}_n=(n \pi,-n \pi)^{\mathrm T}$ :


$$ \left( \begin{array}{c} t \\ \tan(t)-t \\ \end{array} \right)+ \left( \begin{array}{c} 1 \\ -1 \\ \end{array} \right)n\pi = \left( \begin{array}{c} t+n\pi \\ \tan(t+n\pi)-(t+n\pi) \\ \end{array} \right) $$



graph1 = Plot[Tan[t] - t, {t, -3 Pi, 3 Pi},
PlotRange -> {-4, 12}, AspectRatio -> Automatic,
MaxRecursion -> Infinity,
PlotStyle -> Lighter[Blue],
Exclusions -> {1/(Tan[t] - t) == 0},
ExclusionsStyle -> Directive[Gray, Dashed]
] // Quiet;

graph2 = Plot[Tan[t] - t, {t, -Pi/2, Pi/2},
PlotRange -> {-4, 12},

MaxRecursion -> Infinity,
PlotStyle -> Directive[Blue, Thick]
] // Quiet;

Manipulate[
solset = t /. FindRoot[Tan[t] - t == F, {t, #}] &
/@ (.9 \[Pi] Range[-2, 2] + .3);
Show[{graph1, graph2},
Frame -> True,
FrameStyle -> Directive[Opacity[0]],

FrameTicks -> {
{Range[-4, 12], Range[-4, 12]},
{Range[-5, 5, 2] Pi/2, Range[-5, 5, 2] Pi/2}},
FrameTicksStyle -> Directive[Opacity[1], Black, Bold, 20],
Axes -> None,
GridLines -> {None, F + Pi Range[-2, 2]},
GridLinesStyle -> Directive[Lighter[Brown], Dashed],
Epilog -> {
Brown, Thickness[.005],
Line[{{-3 Pi, F}, {3 Pi, F}}],

Darker[Green, .3],
MapIndexed[
Disk[{#1, F} - (#2[[1]] - 3) Pi {1, -1}, .2] &,
solset],
Red,
Disk[{#, F}, .2] & /@ solset,
Lighter[Purple], Thick, Arrowheads[.03],
MapIndexed[
Arrow[{{#1, F} - (#2[[1]] - 3) Pi {1, -1}, {#1, F}}] &,
solset]

},
ImageSize -> 600],
{{F, 4}, -2, 10}]

Mathematica graphics


So for any $F$, to get all solutions of $\tan(t)-t=F$ (the red points in above graphics), just find all intersection points of the center branch of $C$ and horizon lines $l_n(t)=F+n \pi$, where $n\in\mathbb{Z}$ (the green points in above graphics), then translate them with proper vectors.


To find those green points, you can adopt Jens' InverseFunction method, or Alexei's approximate analytical solution, or it is also possible to derive an approximate formal series by functions such as InverseSeries:


seriesZero = InverseSeries[Series[Tan[t] - t, {t, 0, 9}], F]



Mathematica graphics



seriesInfinity = InverseSeries[Series[Tan[t] - t, {t, Pi/2, 9}], F]


Mathematica graphics



Plot[Evaluate[{
Normal@seriesZero,
Normal@seriesInfinity,

InverseFunction[Function[t, Tan[t] - t]][F]
}], {F, 0, 8},
PlotRange -> {0, Pi/2},
PlotStyle -> (ColorData["Rainbow"] /@ {0, .5, 1}),
Frame -> True,
FrameLabel -> (Style[#, Italic, 20, Bold] & /@ {"F", "t"})]

Mathematica graphics


So we have a function of $x$ as $$x\mapsto(F=F(x))\mapsto t\text{ .}$$


Comments

Popular posts from this blog

front end - keyboard shortcut to invoke Insert new matrix

I frequently need to type in some matrices, and the menu command Insert > Table/Matrix > New... allows matrices with lines drawn between columns and rows, which is very helpful. I would like to make a keyboard shortcut for it, but cannot find the relevant frontend token command (4209405) for it. Since the FullForm[] and InputForm[] of matrices with lines drawn between rows and columns is the same as those without lines, it's hard to do this via 3rd party system-wide text expanders (e.g. autohotkey or atext on mac). How does one assign a keyboard shortcut for the menu item Insert > Table/Matrix > New... , preferably using only mathematica? Thanks! Answer In the MenuSetup.tr (for linux located in the $InstallationDirectory/SystemFiles/FrontEnd/TextResources/X/ directory), I changed the line MenuItem["&New...", "CreateGridBoxDialog"] to read MenuItem["&New...", "CreateGridBoxDialog", MenuKey["m", Modifiers-...

How to thread a list

I have data in format data = {{a1, a2}, {b1, b2}, {c1, c2}, {d1, d2}} Tableform: I want to thread it to : tdata = {{{a1, b1}, {a2, b2}}, {{a1, c1}, {a2, c2}}, {{a1, d1}, {a2, d2}}} Tableform: And I would like to do better then pseudofunction[n_] := Transpose[{data2[[1]], data2[[n]]}]; SetAttributes[pseudofunction, Listable]; Range[2, 4] // pseudofunction Here is my benchmark data, where data3 is normal sample of real data. data3 = Drop[ExcelWorkBook[[Column1 ;; Column4]], None, 1]; data2 = {a #, b #, c #, d #} & /@ Range[1, 10^5]; data = RandomReal[{0, 1}, {10^6, 4}]; Here is my benchmark code kptnw[list_] := Transpose[{Table[First@#, {Length@# - 1}], Rest@#}, {3, 1, 2}] &@list kptnw2[list_] := Transpose[{ConstantArray[First@#, Length@# - 1], Rest@#}, {3, 1, 2}] &@list OleksandrR[list_] := Flatten[Outer[List, List@First[list], Rest[list], 1], {{2}, {1, 4}}] paradox2[list_] := Partition[Riffle[list[[1]], #], 2] & /@ Drop[list, 1] RM[list_] := FoldList[Transpose[{First@li...

plotting - How to draw lines between specified dots on ListPlot?

I would like to create a plot where I have unconnected dots and some connected. So far, I have figured out how to draw the dots. My code is the following: ListPlot[{{1, 1}, {2, 2}, {3, 3}, {4, 4}, {1, 4}, {2, 5}, {3, 6}, {4, 7}, {1, 7}, {2, 8}, {3, 9}, {4, 10}, {1, 10}, {2, 11}, {3, 12}, {4,13}, {2.5, 7}}, Ticks -> {{1, 2, 3, 4}, None}, AxesStyle -> Thin, TicksStyle -> Directive[Black, Bold, 12], Mesh -> Full] I have thought using ListLinePlot command, but I don't know how to specify to the command to draw only selected lines between the dots. Do have any suggestions/hints on how to do that? Thank you. Answer One possibility would be to use Epilog with Line : ListPlot[ {{1, 1}, {2, 2}, {3, 3}, {4, 4}, {1, 4}, {2, 5}, {3, 6}, {4, 7}, {1, 7}, {2, 8}, {3, 9}, {4, 10}, {1, 10}, {2, 11}, {3, 12}, {4, 13}, {2.5, 7}}, Ticks -> {{1, 2, 3, 4}, None}, AxesStyle -> Thin, TicksStyle -> Directive[Black, Bold, 12], Mesh -> Full, Epilog -> { Line[ ...