Skip to main content

packages - Making a website with Mathematica


I know many people here have various websites associated with them and I'm guessing do at least some of the development of that stuff in Mathematica.


I recently fell down that rabbit hole myself, building out a website with Mathematica by using pelican as the generator (but running pelican from within Mathematica). And I was wondering what other Mathematica-base ways there are to build out such sites.


I'm fond of the customizability of my route, but with great customizability comes great potential to majorly screw things up. Also I'm using the cloud which is known to be buggy, so it's only a matter of time before my site goes up in smoke.


I know C.E. has a WordPress plugin. Is that the standard route?




Update:



One other method I forgot about is that Transmogrify was built for this purpose. But I've never used it for anything other than documentation building as it seems to be a bit finnicky and takes a lot of work to use. Has else anyone used it for anything other than docs?




I guess my question is, what are good route for building full websites with Mathematica? They don't have to be hosted in the cloud, but to restrict the scope of this question, I'm interested in methods that use Mathematica in some integral way--i.e. to deploy the site or, at the minimum, to generate the markdown--not just to make figures.


If it's still too open ended / subject to opinion I'll see if I can restrict the scope further.




Comments

Popular posts from this blog

plotting - How to draw lines between specified dots on ListPlot?

I would like to create a plot where I have unconnected dots and some connected. So far, I have figured out how to draw the dots. My code is the following: ListPlot[{{1, 1}, {2, 2}, {3, 3}, {4, 4}, {1, 4}, {2, 5}, {3, 6}, {4, 7}, {1, 7}, {2, 8}, {3, 9}, {4, 10}, {1, 10}, {2, 11}, {3, 12}, {4,13}, {2.5, 7}}, Ticks -> {{1, 2, 3, 4}, None}, AxesStyle -> Thin, TicksStyle -> Directive[Black, Bold, 12], Mesh -> Full] I have thought using ListLinePlot command, but I don't know how to specify to the command to draw only selected lines between the dots. Do have any suggestions/hints on how to do that? Thank you. Answer One possibility would be to use Epilog with Line : ListPlot[ {{1, 1}, {2, 2}, {3, 3}, {4, 4}, {1, 4}, {2, 5}, {3, 6}, {4, 7}, {1, 7}, {2, 8}, {3, 9}, {4, 10}, {1, 10}, {2, 11}, {3, 12}, {4, 13}, {2.5, 7}}, Ticks -> {{1, 2, 3, 4}, None}, AxesStyle -> Thin, TicksStyle -> Directive[Black, Bold, 12], Mesh -> Full, Epilog -> { Line[ ...

calculus and analysis - Integral of the Sinc product

Let us consider the following integral $$ B_n = \int_0^\infty \prod_{k=1,3,5,\dots}^n\frac{\sin (x/k)}{x/k}dx $$ By definition, Sinc[x] == Sin[x]/x , therefore B[n_?OddQ] := Integrate[Product[Sinc[x/k], {k, 1, n, 2}], {x, 0, Infinity}] B /@ Range[1, 13, 2] {Pi/2, Pi/2, Pi/2, Pi/2, Pi/2, Pi/2, Pi/2} OK, everything is fine. But... B[15] 467807924713440738696537864469 Pi/935615849440640907310521750000 What's going on? Answer As Eckhard wrote in comments B[n] is the n-th Borwein integral . (The letter B was not accidental :) ) This funny properties of Borwein integrals is related to the Fourier transform of Sinc function FourierTransform[Sinc[x], x, k] 1/2 Sqrt[Pi/2] (Sign[1 - k] + Sign[1 + k]) Plot[%, {k, -2, 2}, Filling -> 0] which is the box function. The result is $\pi/2$ while the sum $$ 1/3+1/5+\dots+1/n $$ B_n = \frac{\pi}{2} - \pi \bigg(\sum_{k=3,5,\ldots}^n\frac{1}{k} -1\biggr)^\frac{n-1}{2}\prod_{k=3,5,\dots}^n\frac{k}{k-1}. $$ For $n=15$ it is equal to $$ \frac{46780...

list manipulation - Selecting multiple columns from a matrix?

Sample data: data = { {{2013, 1, 1}, 24.13, 167.67, 231.82}, {{2013, 1, 2}, 32.15, 170.92, 225.99}, {{2013, 1, 3}, 35.43, 172.68, 221.67}, {{2013, 1, 4}, 36.73, 173.05, 218.32}, {{2013, 1, 5}, 58.19, 165.96, 197.05}, {{2013, 1, 6}, 69.99, 163.50, 187.52}, {{2013, 1, 7}, 71.37, 154.21, 175.58}, {{2013, 1, 8}, 72.51, 149.66, 163.25}}; I want a DateListPlot with three graphs, so for a matrix formed by columns 1 and 2, one for columns 1 and 3, and 1 for columns 1 and 4. At the moment I'm using this code: data2 = Transpose[{data[[All, 1]], data[[All, 2]]}]; data3 = Transpose[{data[[All, 1]], data[[All, 3]]}]; data4 = Transpose[{data[[All, 1]], data[[All, 4]]}]; DateListPlot[{data2, data3, data4}, Joined -> True, Filling -> {3 -> {1}}] but I have a hunch that this can be done more efficiently. I don't like the Transpose s in particular. Any ideas? edit (for extra credit) What if I need to multiply the second column by 2, which in my solution is simp...